Structure-property correlations in fluoride-sulfate-phosphate glasses

The aim of this research was to study the relationships between the formation, structure, and properties of the new glass system, fluoro-sulfo-phosphate poly-anionic glasses, specifically focusing on the effect of the glass structure on optical properties and electrical conductivity. In this project, the fluoro-sulfo-phosphate glass system can be divided into two groups: the FPS series [(100xy)MFn / xSr(PO3)2 / ySrSO4 (x + y ≤ 20%, M = Mg2+, Ca2+, Sr2+, Al3+) with F > P2O5 + SO3] were studied as new host materials for optically active cation species, while the NAPFS series [(100xy)AlF3 / xNaPO3 / yNa2SO4 (x + y ≥ 80%), with F < P2O5 + SO3], whose compositions possess high sodium concentrations, and thus, high ionic conductivity and low activation energy, were investigated for their future application in solid-state sodium-ion batteries

Structure-property relations of 55nm particle-toughened epoxy

55-nm rubber particles significantly toughened two epoxy systems without loss of Young’s modulus, tensile strength and glass transition temperature. Transmission Electron Microscopy (TEM) showed that the nanoparticles are uniformly dispersed in matrix and have blurred interface with epoxy. 5 wt% rubber nanoparticles increased the critical strain energy release rate (G1c) of Jeffamine D230 (J230)-cured epoxy from 175 J/m2 to 1710 J/m2 , while the 10 wt% increased G1c of diaminodiphenyl sulfone (DDS)-cured epoxy from 73 J/m2 to 696 J/m2 . This is explained by comparing the surface–surface interparticle distance and total particle surface of nanocomposites with those of composites. The higher the matrix stiffness, the more nanoparticles needed for toughening. Although the 10 wt% J230-cured nanocomposite showed a 50% larger size of stress-whitened zone than the 5 wt% J230-cured nanocomposite, the 5 wt% nano- composite showed a higher toughness. These nanoparticles were found to pose barriers to the vibration of crosslinked matrix molecules, leading to higher glass transition temperatures. While the matrix shear banding caused by nanoparticle expansion and growth is the major toughening mechanism for the J230- cured nanocomposites, the matrix plastic void growth and deformation are most probably the major mechanisms for the DDS-cured system. Under tensile loading, the nanoparticles in the DDS-cured epoxy created fibrils of 100e200 nm in diameter and 3e5 mm in length. TEM analysis in front of a subcritically propagated crack tip showed a number of voids of 30e500 nm in diameter in the vicinity of the crack, implying that rubber nanoparticles expanded, grew and deformed under loading. Unlike conventional epoxy/rubber composites in which all of the rubber particles in the crack front cavitated under loading, only a portion of the nanoparticles in this study expanded to create voids. Huang and Kinloch’s model developed from composites was found not fit well into these nanocomposites

ANNOUNCEMENT OF THE SUSTAINABLE DEVELOPMENT REPORT OF VIETNAMESE HOTEL ENTERPRISES

The purpose of this study is to examine the factors affecting the publication of sustainability reports from the perspective of managers at 4-5 star hotels in Vietnam. Issues of corporate size, profitability, legal regulation, corporate governance and technology of the company were mentioned as factors that may affect the publication of the report on sustainable development. The author has synthesized the relevant background theory as well as previous outstanding studies on the issue of publishing sustainable development reports. SPSS 20 software was used to test the relationship between the factors affecting the publication of the Sustainable Development Report based on the manager's point of view. The results of the study show that the factors of business size, profitability, and legal regulations all affect the publication of sustainable development reports at 4-5 star hotels in Vietnam. A new finding of this study is that the two factors of corporate governance and the company's technology combine into a public governance factor based on technology and it is the technology that has the strongest influence on the publication of the Sustainable Development Report. The study once again confirms the relationship between the factors affecting the publication of the Sustainable Development Report and is a document to help researchers understand better in the research context in Vietnam, one of the leading countries in the world developing countries and have limited access to and use of secondary data

VLSP SHARED TASK: SENTIMENT ANALYSIS

Sentiment analysis is a natural language processing (NLP) task of identifying orextracting the sentiment content of a text unit. This task has become an active research topic since the early 2000s. During the two last editions of the VLSP workshop series, the shared task on Sentiment Analysis (SA) for Vietnamese has been organized in order to provide an objective evaluation measurement about the performance (quality) of sentiment analysis tools, and encouragethe development of Vietnamese sentiment analysis systems, as well as to provide benchmark datasets for this task. The rst campaign in 2016 only focused on the sentiment polarity classication, with a dataset containing reviews of electronic products. The second campaign in 2018 addressed the problem of Aspect Based Sentiment Analysis (ABSA) for Vietnamese, by providing two datasets containing reviews in restaurant and hotel domains. These data are accessible for research purpose via the VLSP website vlsp.org.vn/resources. This paper describes the built datasets as well as the evaluation results of the systems participating to these campaigns

Isolation, screening antimicrobial activity and identification of fungi from marine sediments of the area Thanh Lan, Co To, Vietnam

Marine environment is rich in natural product resources, including marine microorganisms, especially fungi which are not only seen as a potential source of highly applicable bioactive substances but also can provide for science new chemical structures. The objective of this study is to isolate and screen fungal strains with antibacterial activity from the marine environment. Twenty five strains of fungi were isolated from marine sediments of Thanh Lan, Co To island and assessed on antibiotic activity against 7 tested microbial strains, including three Gram-negative bacteria (Escherichia coli ATCC25922, Pseudomonas aeruginosa ATCC27853, Salmonella enterica ATCC13076), three Gram-positive bacteria (Enterococcus faecalis ATCC29212, Stapphylococus aureus ATCC25923, Bacillus cereus ATCC 13245), and the yeast Candida albicans ATCC10231. The minimum inhibitory concentration (MIC) against the tested microorganisms was determined for the crude extracts obtained from the culture broths after ethyl acetate extraction and vacuum rotary evaporation. Three strains with the highest antimicrobial activity M26, M30 and M45 were capable of inhibiting 4 - 5 of the 7 tested microorganisms with MIC values from 64 to 256 μg/ml, depending on each tested strain. Morphological and phylogenetic investigations based on 18S rRNA gene sequences of the three selected strains showed that strains M26 and M30 belonged to the genus Penicillium, whereas strain M45 belonged to the genus Neurospora. The sequences of 18S rRNA gene of three strains M26, M30 and M45 were registered on GenBank database with accession numbers: MH673730, MH673731, MH673732, respectively. Research results showed that marine environment has a great potential in isolation of fungal strains for the search for antibacterial substances as well as other biologically active compounds

TỔNG HỢP VẬT LIỆU Ni/UiO-66 THEO PHƯƠNG PHÁP TRỰC TIẾP VÀ GIÁN TIẾP

An archetypal metal-organic framework, UiO-6,6, synthesized with the solvo-thermal method, has a large specific surface area of 1071 m2·g–1. This material was modified with NiCl2 in the direct (Nix(tt)/UiO-66) and indirect (Nix(gt)/UiO-66) methods. The two modified materials were characterized by using powder X-ray diffraction, scanning electron microscopy, and infrared spectroscopy. Their crystalline and chemical structure is not much different. However, the thermal and porous properties differ from each other.UiO-66 là họ vật liệu khung hữu cơ kim loại tổng hợp bằng phương pháp nhiệt dung môi có diện tích bề mặt riêng lớn (1071 m2·g–1). Vật liệu UiO-66 này được biến tính bằng NiCl2 theo phương pháp trực tiếp (Nix(tt)/UiO-66) và gián tiếp (Niy(gt)/UiO-66). Kết quả đặc trưng hai vật liệu biến tính này bằng nhiễu xạ tia X, hiển vi điện tử quét và phổ hồng ngoại khác nhau không đáng kể. Tuy nhiên, phân tích nhiệt trọng lượng và đẳng nhiệt hấp phụ – khử hấp phụ N2 cho thấy có sự khác nhau giữa các phương pháp tổng hợp

STUDY ON THE EFFECT OF CALCIUM-ALGINATE AND WHEY PROTEIN ON THE SURVIVAL RATE OF Bifidobacterium bifidum IN MAYONNAISE

ABSTRACT – QMFS 2019The functional food development by adding probiotic bacteria is getting a lot of concern. In this study, Bifidobacterium bifidum AS 1.1886 was encapsulated in calcium-alginate 2% w/v (C sample) or the mix of calcium-alginate 2% (w/v) and whey protein 1% (w/v) (CW sample) or calcium-alginate 2% (w/v) coated by whey protein 1% (w/v) (CcW sample) by extrusion method, and added to mayonnaise product. The pH changes, the survival rate of probiotic bacteria, and total yeast and mold count during storage, as well as the probiotic survival in simulated gastric medium, were evaluated. The result showed that the pH changes were not significantly different in all mayonnaise samples in this test. The viability of the free probiotic cell was significant decrease about 5.85 log CFU/g compared to 0.26 ÷ 1.14 log CFU/g in encapsulated cell samples after four weeks of storage. None of the free cells survived after six weeks of storage. The total yeast and mold count in samples related to the probiotic count, the viability of probiotic cells higher 6 log CFU/g might be controlling the growth of yeast and molds in mayonnaise. Whey protein has been shown to significantly improve the survival rate of B.bifidum and calcium-alginate coated by whey protein, indicating the most effective protection. The result showed that the application potential of encapsulated probiotic in mayonnaise product

Interface-tuned epoxy/clay nanocomposites

Though interface has been known for a critical role in determining the properties of conventional composites, its role in polymer nanocomposites is still fragmented and in its infancy. This study synthesized a series of epoxy/clay nanocomposites with different interface strength by using three types of modifiers: ethanolamine (denoted ETH), Jeffamine� M2070 (M27) and Jeffamine� XTJ502 (XTJ). XTJ created a strong interface between clay layers and matrix because it bridged the layers with matrix by a chemical reaction as proved by Fourier transform infrared spectroscopy; M27 produced an interme-diate interface strength due to the molecular entanglement between grafted M27 chains and matrix molecules; the interface made by ETH was weak because neither chemical bridging nor molecular entanglement was involved. The studies of mechanical and thermal properties and morphology at a wide range of magnification show that the strong interface promoted the highest level of exfoliation and dispersion of clay layers, and achieved the most increment in Young’s modulus, fracture toughness and glass transition temperature (Tg) of matrix. With w1.3 wt% clay, the critical strain energy release rate G1c of neat epoxy improved from 179.0 to 384.7 J/m, 115% improvement and Tg enhanced from 93.7 to 99.

Burden of cancer in the Eastern Mediterranean Region, 2005-2015: findings from the Global Burden of Disease 2015 Study

Fitzmaurice C, Alsharif U, El Bcheraoui C, et al. Burden of cancer in the Eastern Mediterranean Region, 2005-2015: findings from the Global Burden of Disease 2015 Study. INTERNATIONAL JOURNAL OF PUBLIC HEALTH. 2018;63(Suppl. 1):151-164.To estimate incidence, mortality, and disability-adjusted life years (DALYs) caused by cancer in the Eastern Mediterranean Region (EMR) between 2005 and 2015. Vital registration system and cancer registry data from the EMR region were analyzed for 29 cancer groups in 22 EMR countries using the Global Burden of Disease Study 2015 methodology. In 2015, cancer was responsible for 9.4% of all deaths and 5.1% of all DALYs. It accounted for 722,646 new cases, 379,093 deaths, and 11.7 million DALYs. Between 2005 and 2015, incident cases increased by 46%, deaths by 33%, and DALYs by 31%. The increase in cancer incidence was largely driven by population growth and population aging. Breast cancer, lung cancer, and leukemia were the most common cancers, while lung, breast, and stomach cancers caused most cancer deaths. Cancer is responsible for a substantial disease burden in the EMR, which is increasing. There is an urgent need to expand cancer prevention, screening, and awareness programs in EMR countries as well as to improve diagnosis, treatment, and palliative care services

Neonatal, infant, and under-5 mortality and morbidity burden in the Eastern Mediterranean region: findings from the Global Burden of Disease 2015 study

Objectives Although substantial reductions in under-5 mortality have been observed during the past 35 years, progress in the Eastern Mediterranean Region (EMR) has been uneven. This paper provides an overview of child mortality and morbidity in the EMR based on the Global Burden of Disease (GBD) study. Methods We used GBD 2015 study results to explore under-5 mortality and morbidity in EMR countries. Results In 2015, 755,844 (95% uncertainty interval (UI) 712,064–801,565) children under 5 died in the EMR. In the early neonatal category, deaths in the EMR decreased by 22.4%, compared to 42.4% globally. The rate of years of life lost per 100,000 population under 5 decreased 54.38% from 177,537 (173,812–181,463) in 1990 to 80,985 (76,308–85,876) in 2015; the rate of years lived with disability decreased by 0.57% in the EMR compared to 9.97% globally. Conclusions Our findings call for accelerated action to decrease child morbidity and mortality in the EMR. Governments and organizations should coordinate efforts to address this burden. Political commitment is needed to ensure that child health receives the resources needed to end preventable deaths